Stock #874 - 5-Axis Grinder - Used Equipment Sale

Capacity

• Max. Grinding Radius: 4"/102 mm
• Max. Overall Length: 12"/305 mm
• Max. Diameter: 12"/305 mm

Axis Travels - Moving the Wheelhead

• Z-Axis: 16"/406 mm
• Y-Axis: 16"/406 mm

Axis Travels - Moving the Part

• A-Axis (Rotary Work Spindle): 360° rollover
• X-Axis (Main Base Slide): 16"/406 mm
• C-Axis (Rotary Table): 165° (+25° to 135°)

Wheelhead

• Wheel Spindle RPM Range: 4000-8000 rpm
• Wheel Diameter (Standard): 6-8"/154-204 mm
• Wheelhead Horsepower: 28 hp at S6 duty

Workhead

• Diameter of Opening (Spindle ID): 2"/50,8 mm

Feed Rates

• All Linear Axes: 0-393 ipm/0-9,98 mpm
• Rotary A Axis: 150 rpm
• Rotary C Axis: 5.5 rpm

Weight & Dimensions

• Total Weight: 16000 lbs/8 ton
• Approx. Floor Area (Machine & Electrics): 43 sq. ft./4 sq. m.
• Overall Height with Pre-Filter: 97"/2,5 m
• Floor to Centerline of Workholder: 48"/1,2 m

Utilities

• Electrical Requirement: 380 Volt, 3-Phase, 50Hz, 100 amp service
• Shop Air Supply: 80psi (1/4 - 18 NPT)

Note: the user must ground the machine in accordance with NEC and supply a grounded Wye secondary power source with voltage ±10% of specified normal and phase balance ±5% when checked from one leg to ground.

• Fanuc Series 15MB CNC with 9" monochrome display
• Fanuc Data Server
• Pendant mounted machine control and operators panel saves space and increases operating convenience
• Automatic lubrication of all axis rails and ballscrews reduces maintenance requirements, and extends the machine life and accuracy
• Digital AC brushless servo drive systems maintain travel accuracy
• Standard motor encoder feedback on all axes
• A full 28 HP, heavy duty, variable speed grinding spindle with 4,000 to 8,000 RPM accommodates a wide range of grinding requirements
• Foot pedal actuated, hydraulically powered, retractable tailstock assembly
• Small, 43 sq. ft. machine footprint saves space and facilitates universal integration into any manufacturing system or tool room.  Can be used with optional high pressure, flood coolant systems
• Warranty: Six (6) months parts replacement
• Cast iron machine base provides improved machine rigidity and stability
• Complete heavy-duty machine enclosure enhances operating environment and meets OSHA safety and noise requirements

• Modifications to allow use of Water Based Coolant, oil based is preferred
• High-Pressure Flood Coolant System Integration
• Automatic Wheel Balancer and wheel hub
• Machine Modifications to meet CE Safety Directive
• Metal Reinforced Way Covers, Spray Wash Valve and Vent Door Guard Cage